Converting Equipment

106'' Web Width One (1) Color Wolverine Print Deck Built on a one-color cast-iron frame. Full Print Width: 105”. Repeat Length Range: 18'' – 40”. Impression Cylinder: 7.958” Diameter. Anilox Roll: 7.810” Diameter. Includes:- Doctor Bladed Anilox Roll- 1/4 CP gearing.- Three (3) 6'' stainless steel slot type air distribution tubes.

58” Standex Rotary Metal Embosser. Standex Engraving Mark 250 SP Rotary Hydraulic Metal Embosser. Designed to Run as Sheet Fed or Continuous operation. 54" Maximum Material Width. Designed for Metal Embossing, Aluminum or Stainless Steel. The Embosser is a Stand-Alone Machine. Manufactured 2015. Like new condition.

90” Web Kusters Embossing Calender 3-Roll Stack. Includes (2) two Kuster S-Roll with engraved embossing patterns one (1) middle position heated tri-pass roll. Rolls have a 102” Face Width and 20” Diameter. Includes hydraulic system and oil heating system and drive motors. Previously used for processing Non-Wovens.

Perini Core Winding Line 2 PLY. MFG 1996. Consisting of (2) Mod# 4203 unwind stands with dancer unit. Cardboard Reel unwind capable of 60" (1524mm) OD rolls and reel hoisting lift. Valco cold glue system. Unit has Core loader and core hopper. Video Jet Printer.

60" Wide Baler by Maren Model Excel EX 62 Dimensions: 47" long x 60" wide x 30" height.

Quantity (2); Model VAZ 300 / 250 UNF Vecoplan Shredders; 5344-010 Machine Number; Rebuilt “As New” In 2022; Mfg. Year 2001; Rotor: 620mm Diameter; 2491mm Length; Speed: 142 RPM; Main Drive: Electric Motor with Fluid Coupling, Joint Shaft, Two Step Spur; Spur Gear Ratio: 12.5 to 1; Nominal HP: 192 Kw; Nominal Amps: 332A; Motor RPM: 1782; Electricals: 460V / 3 Ph / 60 Hz.

5.8 Meter (228”) Bombi Three-Roll Nonwoven Calender; Type CAL/3C/5.8; 3-Roll; Working width 5800mm; Roll Width 6100mm (240”); Roll Diameter: 800mm (31.5”); Pressure approx. 25 Tons (240 PLI); Oil Heated; Year: 2007.

75" ECH Will unwinds Six (6) Available. Each with Double E 3"/5" combo chucks Dual 15" air brakes 75" wide by 60" diameter rolls Shaftless floor pick-up roll out stands 230/460 volt Above the Floor Design Requires flat steel tracks. Quantity (6).

65” Width x 72” Diameter; ECH Will Dual Floor Pickup Unwinds with Marquip Tail-grabber Splicers. Set of Two (2); Total of Four (4) unwinds with (2) Splicers. Includes Overhead Frame Input System.

4” Dusenbury Table Salvage Rewinder Model 750AB ½ HP. Was in operating condition when pulled out of service for newer equipment. Table Winder can be seen under power.

13.5” Arpeco Tracker Salvage Slitter Rewinder. Was in operating condition when pulled out of service for newer equipment. Web width 12”. May be seen with mechanical and electrical turnover.

62” Width x 50” Diameter Black Clawson Turret Unwind with Auto Splicing. The unwind is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing.

62” Width x 50” Diameter Black Clawson Turret Rewinder with Splicing. The rewinder is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing.

CLEANSWITCH® RTO Model CS-250 manufactured by Megtec, Capacity 37,000 CFM, Year 2003. Includes New York Blowers, and an on-machine skid mounted control room. Unit has a modular design and is assembled on a steel base frame. Removal and transportation are the buyer’s responsibility. Simple, Modular Design Designed to reduce complexity, the CLEANSWITCH® RTO provides cost benefits with its flexible, modular design. These units are 99% factory assembled for a simple and economical installation. A climate controlled, skid-mounted control room is included for easy access to controls in any type of weather.

144" Drum Width Paper machine winder, Black Clawson, 2-Drum slitter rewinder. Roll Diameter: 60"; Operating speed 2500-3000 FPM. Originally manufactured late 1960’s. Previous paper grade was light weight specialty paper.

400 HP Roto-Grind Shredder Granutech-Saturn Systems Model# M240H 460V/3PH/60Hz. Chamber Size: 95” x 100” Rotor Diameter: 20”. Formerly Used on Carpet. Manufacturer states that this model shredder is effective for Plastics Fiber Thin Film Rigid Scrap Carpet Medical Waste Product Destruction Pallets Document Destruction. Includes Hydraulic Pump Skid Feed Conveyor and was running until shutdown due to process change.

75” Web Egan Inline 2-Roll Calender for Coater Line. Two (2) Roll Steel to Steel Calender Assembly with Spare rolls. Calender Rolls are 24” and 16” diameters. Manufactured in 1992 and well maintained. Equipment is currently shutdown and available Summer 2023 . Quantity (1).

75” Web Egan 4-Roll Chill Station or Hot Decurl Station. 4-Roll Assembly includes a single nip pull roll. Each of four rolls can be heated or chilled depending on the application. Part of decommissioned coater line. Manufactured by Egan, Year 1992.

75” Web Width Egan Offset Gravure Coater Station. The gravure roll includes doctor blade applicator. Allows for flexibility in coating weights and applications. Manufactured in 1992 and well maintained. Equipment is currently shutdown and available Summer 2023 . Currently set up to perform front and back side coating on paper. Two (2) Stations Available. Includes Available Spare Rolls. Two (2) Stations Available.

60” Rotogravure Coating Station. Manufactured by Black Clawson. The complete rotogravure coating line is intact and includes turret unwind / rewind, auto splice transfer station.