120” Web Black Clawson Rewinder; 72” Shaftless Rewind, Lowering Table; Speed: 3000 FPM; Shear Slitting; Rewind Diameter: 72”; Black Clawson Shaftless Floor Pick-Up Unwind, 72” Diameter, Year 1989.

Two (2) 60” NDC Scanners, Model 8200, Back-up software disk included. Radioactive source removed. New in 2019 with only sporadic usage since installed. Capable of thickness testing and coating basis weight measurement.

60” Width x 60” Diameter Davis Standard (ER-WE-PA) Turret Unwind; Dual Spindle Turret 3", 6" Core Diameter; Automatic Splicing Unit; With Web Guidance; Dancer System with Potentiometer Feedback Tension Control; Year: 1986/2004 / S/N: 8516-1037.

54” Automatic Splice Drum Surface Winder / Reel; Mfg. Davis Standard (ER-WE-PA). 54” Roll Width x 60” Diameter; 56.5” Drum Width; 36” Drum Diameter; 6” Air Shafts; Auto Shaft Pulling and Loader Accessory. Year: 1986/2004 S/N: 8516-1037.

130" Horizontal Track Reel, Manufactured by GL&V. Dimensions: 129.25" Drum Face, 84" max Roll Diameter. Year 2018 Upgrades: Include New Primary & Secondary Arms for added automation and control. Reel was rebuilt utilizing the existing reel drum, reel bases, and reel doctor. New Primary and Secondary Arms were added with new Pneumatic cylinders and controls and other drive components.

60” Dual Spindle Turret Unwinds; 60” Diameter; Quantity (3); Capacity: 40,000 lbs.; Includes 60” Ultrasonic Flying Splice. Mfg. by Toko; Year 2000. Formerly used for film converting.

60" High Performance Turret Unwind / Rewind Pair, 60" Diameter on Unwind / Rewind. Shaftless design. High speed flying splice. Drives and Controls included. Formerly used in film converting operation.

5.8 Meter (228”) Bombi Three-Roll Nonwoven Calender; Type CAL/3C/5.8; 3-Roll; Working width 5800mm; Roll Width 6100mm (240”); Roll Diameter: 800mm (31.5”); Pressure approx. 25 Tons (240 PLI); Oil Heated; Year: 2007.

144" Drum Width Paper machine winder, Black Clawson, 2-Drum slitter rewinder. Roll Diameter: 60"; Operating speed 2500-3000 FPM. Originally manufactured late 1960’s. Previous paper grade was light weight specialty paper.

58” Standex Rotary Metal Embosser. Standex Engraving Mark 250 SP Rotary Hydraulic Metal Embosser. Designed to Run as Sheet Fed or Continuous operation. 54" Maximum Material Width. Designed for Metal Embossing, Aluminum or Stainless Steel. The Embosser is a Stand-Alone Machine. Manufactured 2015. Like new condition.

62” Width x 50” Diameter Black Clawson Turret Rewinder with Splicing. The rewinder is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing.

62” Width x 50” Diameter Black Clawson Turret Unwind with Auto Splicing. The unwind is from a rotogravure coating line now out of operation. Includes Transfer Station for auto splicing.

60” Rotogravure Coating Station. Manufactured by Black Clawson. The complete rotogravure coating line is intact and includes turret unwind / rewind, auto splice transfer station.

72” Roll Storage Carousel for 158 Rolls of varying widths and diameters built by Fab-Tech in 2001. Capacity: (158) Carriages with Avg. load of 500 lbs. per carrier. Total weight capacity is 79,000 lbs. with a Max 677 lbs. per carriage. Total (158) Rolls Maximum. Retrieval Time (avg.): 4 minutes 3 seconds. Roll Widths: 48” – 72”; Roll Diameters: 3.5” – 13.75”. Year 2001. Machine Dimensions: 32’-10” H x 26’-5” D x 13' W

CLEANSWITCH® RTO Model CS-250 manufactured by Megtec, Capacity 37,000 CFM, Year 2003. Includes New York Blowers, and an on-machine skid mounted control room. Unit has a modular design and is assembled on a steel base frame. Removal and transportation are the buyer’s responsibility. Simple, Modular Design Designed to reduce complexity, the CLEANSWITCH® RTO provides cost benefits with its flexible, modular design. These units are 99% factory assembled for a simple and economical installation. A climate controlled, skid-mounted control room is included for easy access to controls in any type of weather.

Quantity (2); Model VAZ 300 / 250 UNF Vecoplan Shredders; 5344-010 Machine Number; Rebuilt “As New” In 2022; Mfg. Year 2001; Rotor: 620mm Diameter; 2491mm Length; Speed: 142 RPM; Main Drive: Electric Motor with Fluid Coupling, Joint Shaft, Two Step Spur; Spur Gear Ratio: 12.5 to 1; Nominal HP: 192 Kw; Nominal Amps: 332A; Motor RPM: 1782; Electricals: 460V / 3 Ph / 60 Hz.

60" Chill Roll Lamination Station; Davis Standard (ER-WE-PA); 63” Drum Face x 36" Diameter; Year: 1986; Gloss Finish Chrome Roll; 87” Bearing Centerline. Includes: Spare 36” Diameter Chill Roll; S/N: 7140.

8' w x 12' t x 42" Uline Warehouse Pallet Racking. Fewer than 10 Years old in Good Condition. Contact us with your requirements.